Driving at night is very dangerous if your head headlights do not operate. Reduced visibility makes it more difficult to see the roadway ahead of you and throw your eyesight into the distance. That is the main reason you must replace a malfunctioned headlight switch of your car. One word of caution — If you're ready to replace your headlight Combination Switch without wasting any second, our guy JIAHAO is here with a straightforward and simple guide that will help you to do it without much ado.
How to Change Out the Headlight Switch
These are the steps to replace the headlight switch:
Disconnect the Battery – The first thing you have to do when acquiring your car is to disconnect the negative battery cable from your car battery. This will generally protect you from electricity problems that could come your way as you do your work. Ensure that the cable is fully disconnected before proceeding to the next step.
Step 1: Find the Headlight Switch – First, you have to find the headlight switch. This is actually placed in your dashboard and is usually found right in front of you in case you are sitting in your driver's seat. If you do not know where it is, you will find it in your car's manual. Such a manual will display an image or description of how to easily identify the location of the switch.
Remove the Switch Panel — Now, you will want to remove the switch panel. You can do it using a flathead screwdriver. Insert the screwdriver between the panel and dashboard and pry the panel off; use caution not to break the plastic. Jiggle, press and twist a little around the panel, but be careful not to rupture the plastic. You want to get rid of it without damaging your car's interior.
Remove the Old Switch – After removing the panel, you should be able to access the old headlight switch. Now, you have to unscrew it from the dashboard. Loosen the screws that help hold the switch in place using a screwdriver. The screws, which are not standard, must be saved for the new switch.
Unplug the Wires– Once you have unscrewed the switch, the next thing you do is unplug the wires connected at the back of the switch. There might be a few cables, and you will have to very gently pull them out to separate them. Reserve memory on where every cable goes for when you must connect it to the switch.
Install the New Switch – Once you have removed the old switch, you can install the new switch. Now place the new switch in the hole where the old one was. Then screw it into place using the screws you saved earlier. Make sure it is secure but do not tighten the screws too much.
Reconnect the Wires – This is after securely mounting the new switch. One can now reattach the wires back. Attach each one of them back into the new switch appropriately. The reasons for this procedure are that there must be wiring attached on the switch in order to activate them.
Attach the Switch Panel — Now that the new switch has been installed, and the wires have been pushed back to the switch, it is time to place the switch panel back onto your dashboard. The panel should now be pushed firmly back until you hear it lock.
Reconnect the Battery: Reconnect your car's negative battery last. This will ensure a good connection to your vehicle's battery and a successful replacement procedure.
Safety Guidelines for Driving in the Night
Looks like you have successfully replaced the Headlight Switch, just to see clearly at night drive safe, you can make some moves. Here are some helpful tips:
Keep Your Headlights Clean – Headlights can become dirty or foggy over time. This can make them dimmer, not great for nighttime driving. Tip: Clean your headlights regularly! And they can be shined up with a cloth and some cleaner.
Use High Beams When Needed – If you are driving on a totally dark road with no other cars passing by you, you may use your high beams. High beams allow you to see more in front of you. Just be sure to flip back to low beams once you see cars coming your way. This is important so that you don't blind other motorists.
Do Not Drive While Sleepy - It's possible that driving drowsy could be just as deadly as an alcoholic gargling after driving. Try to get sleep, pull the vehicle over at a safe spot and give your self ample rest time in case you were extremely fatigued and likely not in great driving condition after pulling over so safely.
Get Headlight Switch Making into your safety plan
So, you are not going to be safe in driving with the headlight switch broken for you and rest of the drivers in the street. If your headlights don't work well then, this may result in serious accidents. Our this headlight switch replacement guide by JIAHAO can help you take care of evils of driving at night with non-functional headlights. Ensure that your vehicle is healthy and you will be safe behind the wheel before hopping into the car!
JIAHAO's Easy DIY Guide
The process of replacing your car's headlight switch may seem complicated, but JIAHAO's Lgnition Switch simple step-by-step tutorial makes it a do-it-yourself job. All you need is some tools, and basic skills. To make sure you change your headlight switch safely and in no time, follow these steps.Frame your headlight switch.
Headlight Switch: Replace Now, Not Later
Don’t wait until the road ahead of you is completely dark when debating replacing your Window Lifter Switch! Better now than end up driving without headlights that work. Replacing your headlights switch is simple and fast with JIAHAO's guide. And with your headlights in top condition, you can continue driving confidently and safely.
